you need to get use to the command sets.. If you are a Cisco user it will be easier to compare the commands with cisco's. set vlans trust vlan-id 10 is the same as set interfaces vlan unit 10 family inet address 192.168.10.1/24 and set vlans trust l3-interface vlan.10 are the same as set interfaces … Continue reading Juniper Networks: Configuring Vlan interface on SRX210H
Remove insecure system services The default configuration allows telnet and http, remove these from the default configuration. Create users Create an administrator account and prevent the use of root. Create operator account and readonly account. Set up NTPd for time synchronization Time is important for the syslog messages and event messages to be useful. By … Continue reading Juniper Networks: Default configuration hardening.
If your password is too simple you will receive this message error: require change of case, digits or punctuation