Wireless: Cisco Aironet 1040 single band 802.11n (Basic configuration)

Create a SSID ap.(config)#dot11 ssid testap2 ap.(config-ssid)# Enable SSID broadcast ap.(config-ssid)#guest-mode Setting up WPA-PSK ap.(config-ssid)#authentication open ap.(config-ssid)#authentication key-management wpa ap.(config-ssid)#wpa-psk ascii cisco123 Attached radio interface to ssid ap.(config)#int dot11Radio 0 ap.(config-if)#ssid testap2 ap.(config-if)#encryption mode ciphers aes-ccm (Default cipher is aes-ccm so you have the option not to explicitly configure the cipher)