EIGRP: Bandwidth Part2

R1#sh interfaces serial 0/0 Serial0/0 is up, line protocol is up Hardware is PowerQUICC Serial Description: This is a DCE to R2 Internet address is MTU 1500 bytes, BW 1544 Kbit/sec, DLY 20000 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation HDLC, loopback not set Keepalive set (10 sec) Last input 00:00:06, output 00:00:05, … Continue reading EIGRP: Bandwidth Part2


EIGRP: Configuration and verification Part1

Scenario: You are tasked to configure EIGRP routing among various departments. Loopback1 of R1 is Engineering, loopback2 of R2 is Marketing, loopback3 of R3 is Sales. All physical connections have already been installed as shown in this logical network diagram. You do not need to configure anything on the switch. The switch has a localized … Continue reading EIGRP: Configuration and verification Part1